Docks

Whether you are looking for a stationary or floating boat dock, Curtis Lumber can help!

We carry roll-in, floating, and stationary boat dock kits, all ready to assemble. View our lookbook of dock options.

Boat Dock Kits and Parts are in stock at the following Curtis Lumber Stores: Ballston, Schuylerville, Warrensburg, East Greenbush, Hoosick, Queensbury, Schroon Lake, Perth, Granville, Schaghticoke, Delhi, Hamilton, Richmondville, Sidney, and Ray Brook. Available at all other stores in 7-10 days.

In-Stock Boat Dock Kits:

Standard Dock Frame Kit

Builds 4′ x 6′ Wood Dock Frame. Powder Coated brackets tie the 2′ x 6′ wood frame together for Stationary or Roll In dock sections. 2 year Warranty (Lumber and Screws Sold Separately)

Wood Dock Frame Kit

Build It Yourself and Save! All the Brackets and Hardware to build a 4′ x 10′ Wood Dock Frame. Heavy Duty, Hot Dipped Galvanized Components securely tie 2′ x 6′ wood frame together for Stationary, Roll In or Floating dock sections. 25 year Warranty (Lumber and Screws Sold Separately)

Aluminum Dock Frame Kit

Everything included to Assemble a 4′ x 10′ Aluminum Dock Frame. Sleek design is made with a strong tempered alloy. Lightweight and Durable; each section weighs less than 200lbs and carries a Full 15 year Warranty. Can be built as Stationary, Roll In or Floating. Combine with Resin Dock Top for quick assembly. (Dock Top options sold separately)

Stocked Boat Dock Parts:

Dock Ladder

Heavy-Duty Resin Dock Ladder includes Hot-Dipped Galvanized Mounting Brackets and Hardware. Adjust to 4 or 5 Steps. Tall Arch Design for Stable Climbing. Ergonomic Hand Rails for a Secure No-Slip Grip. Deep Steps with Ribbed Surface Ensures Traction. Will Not Crack, Fade or Rust. No Sharp Edges. Stays Cool to the Touch. Easy to Install. Adjustable from 36″ to 47″ Lengths 20″ Wide Opening 350 lb Weight Rating and 15 Year Warranty.

Marine Dock Float

Superior Impact Resistant Marine Dock Float. Stable, safe and maintenance free with large surface area and low center of gravity. 500 lbs of buoyancy.

Dock Wheel

Makes installation and removal of your Dock easy with less effort. 23 1/2″ diameter wheel with 1 5/8″ diameter hub. For use with Dock Axle kit or Premium Adjustable Leg

Resin Dock Top

Ten 2′ x 2′ Interlocking panels for a 4′ x 10′ dock section. Maintenance Free with Slip Resistant Surface. Fits Premium, Aluminum, Commercial Grade Docks or PlayStar’s Original Wood Floating Dock. Includes all hardware to connect interlocking panels and fasten Resin top to dock frame.

Dock Axle Kit

Makes Dock Installation and Removal Easy. Use with PlayStar Dock Wheel (Purchased Separately)

Multi-Purpose Dock Bumper

Easily Installs on any dock. Mount horizontally or vertically. Superior protection against Nicks and Scratches.

Pipe Sleeve Bumper

Fits PlayStar Commercial Grade and Standard Pipe Sleeves. Easily Adjusts without removal.

Torpedo Bumper

Inflatable. Use on all Sizes of Boats

Commercial Outside Corner Bracket

Hot Dipped Galvanized for Long Life. Securely ties frame together. Use with Inside Corner bracket PS 1011 and Gusset PS 1019 for the Strongest DIY Dock Corner on the market.

Commercial Inside Corner Bracket

Hot Dipped Galvanized for Long Life. Prevents twisting & bending. Use with Outside Corner bracket PS 1013 and Gusset PS 1019 for the Strongest DIY Dock Corner on the market.

Commercial Grade Gusset

Reinforces Inside Corners. Use with Outside Corner bracket PS 1013 and Inside Corner bracket PS 1011 for the Strongest DIY Dock Corner on the market.

Commercial Joist Corner Bracket

Reinforces and Supports frame

Commercial Grade Back Plate

Heavy Duty Hot Dipped Galvanized Washer

Commercial Dock Connector Clip

Unique Design Securely Attaches Stationary & Roll In Docks. A 180 degree “flip” with this universal part allows two sections to be easily joined together. Hot Dipped Galvanized for Long Life. PS 1021 equals qty of 1. Use 4 to connect 2 dock sections.

Commercial Dock Hinge Kit

Connect Dock Sections together quickly and easily. Ideal for modular floating dock construction. Marine Grade Hot Dipped Galvanized Finish.

Commercial Grade Pipe Sleeve

Fits 1 5/8″ & 1 7/8″ diameter pipe. For Use on Stationary, Roll In or Floating Docks

Commercial Grade Dock Auger

Easily anchors 1 5/8″ or 1 7/8″ outside diameter dock pipe to bottom of lake or river. Marine Grade Hot Dipped Galvanized Finish. Includes bolt for securing pipe.

Commercial Dock Foot Plate

Fits 1 5/8″ & 1 7/8″ diameter pipe

Dock Mooring Ring

3″ Heavy Duty Ring. Hot Dipped Galvanized for Long Life

Resin Dock Cleat

8″ cleat with large tie off area. Mounts with two screws (not included)

Dock Pipe Safety Caps

Fits 1 5/8″ outside diameter pipe. Sold in quantities of 4.